In steep terrain and on tight lots, retaining walls create more usable area.
Something
there is that doesn’t love a
wall,
That
sends the frozen-ground-swell under it,
And
spills the upper boulders in the sun;
And
makes gaps even two can pass abreast.
—Robert
Frost, “The Mending Wall”
As
long as humans have built walls to hold back soil and water—and sometimes
cattle, and even neighbors—competition has been strong to build a better
structure with greater ease but also greater strength. Today’s retaining wall
industry is a competitive market in which companies vie for the right to hold
back soil and water on various sites. Fortunately for the consumer, this
competition has resulted in more and better products, all of which have their
merits, depending on the application.
Wall
Provides Additional Parking at Lowe’s
As
general manager and vice president of MSE Site Solutions in Atlanta, GA, Patrick
Flanagan has installed retaining walls all over the Southeast. A recent project,
completed in March 2008, involved using Redi-Rock to build a 3,000-square-foot
retaining wall for a parking lot at a Lowe’s home improvement store in
metropolitan Atlanta.
“The
wall went up with amazing speed,” Flanagan says. “We were under pressure to get
it completed, and we put in a massive amount of wall in only three and a half
construction days.”
Ironically,
Flanagan credits the 5.75-square-foot size and 2,500-pound weight of the
Redi-Rock blocks for their speed in handling. “It takes three fewer men on a
crew than it does with small blocks of 80 to 100 pounds, which are lifted and
placed by hand. Using equipment, we can set 6 square feet of wall at a time.
These are like giant concrete Legos.”
Because
Lowe’s wanted to maximize the amount of usable real estate on its site,
it
was necessary to make a shear cut at the property line and create a 12-foot
non-reinforced gravity wall. The result was an additional 26 parking
spaces.
“We
spent more money for the block system, but we created more usable square footage
and therefore more usable real estate,” Flanagan says of the project, which did
not require geogrids or tiebacks.
The
drainage system involved standard perforated pipe laid the horizontal length of
the wall, with a split every 50 feet to discharge water. “Groundwater is the
enemy,” Flanagan notes.
 |
Photo: WestBlock Systems |
| A narrow road and limited access made this project challenging. |
Wall
Keeps Homeowners from Slip-Sliding Away
One
of the major challenges for some homeowners is a steep, slippery bank in front
of a residence. Mowing is virtually impossible, and even when planted with
perennials, such an area is subject to erosion. Sometimes the only answer is to
re-grade and erect a retaining wall. If steps can be added giving further
access, so much the better.
As
owner of Total Landscaping in University Place, near Tacoma, WA, Rex Saathoff
used WestBlock Systems’ GravityStone Modular components for a wall in a
residential sloping yard in south Tacoma. “The house was about 4 feet higher
than the sidewalk, with a bank at more than a 45-degree angle. The homeowners
were not comfortable trying to mow because the ground was slippery,” Saathoff
says.
Using
the GravityStone retaining wall system, Total Landscaping built up the yard,
making it flat and easier to work on. With downspouts and gravel added behind
the wall, it also acted as a natural drainage system.
In
addition, by using blocks and caps, it was possible to add decoration and a
tread surface, creating a recessed stairway from the house to the sidewalk. “It
blends well and matches the wall,” Saathoff says.
Because
the area behind the wall was eventually seeded, topsoil was imported, as was
1.25-inch clean crushed gravel. “It packs in better than round gravel, yet
allows water to drain better than crushed rock with fines in it,” Saathoff
says.
The
relatively simple project was completed in three weeks, with the wall’s
construction taking three or four days.
Steep
Slope Lake Access Requires Innovative Solutions
Homeowners
face particular challenges when much of their usable property is on a steep
slope. Not only is mowing difficult or impossible, but access to other, more
desirable areas of the property is often limited.
Jim
Hartwell, owner of Franklin Outdoor Services (FOS) in Burnsville, MN, created a
site plan for a residential project in Lakeville, MN, that addressed both site
challenges and erosion. The homeowners had excellent views of a private lake
behind their home, but a steep slope prevented access, and the soil closer to
the lake was a saturated, marshy bog.
 |
Photo: SRW Products |
| A double-tier retaining wall created space for a patio. |
Hartwell’s
plan involved building retaining walls and a patio, including installation of a
geogrid and soil stabilization fabric. “We chose the SRW Products’ SS5 Soil
Stabilization Fabric to create a stable base,” says Dale Wolf, a supervisor at
FOS. “We knew the bog would pose a big compaction problem; you couldn’t even
walk on it without your feet sinking in. There’s no way to compact soil like
that without reinforcement.”
To
transform the bog into a solid patio, Wolf prepared the site by clearing brush
to level and smooth out the subgrade, removing any sharp objects such as free
branches or large rocks that could puncture the soil stabilization fabric. Next,
he placed SRW SS5 fabric over the entire area to be compacted. The fabric was
pulled taut and secured with fabric staples; where more than one piece of fabric
was needed, it overlaps by 18 inches to 3 feet. Class 5 dirt was brought in as
additional base material and compacted in 2-inch lifts until the site was back
up to grade. Bedding sand was spread to support the patio
blocks.
To
hold back soil from the steep slope leading up to the house, Wolf created a
double-tier 6-foot retaining wall. To prepare the base for the geogrid, he
removed all debris, including sticks and rocks, and groomed the soil to
eliminate dips or potholes. The geogrid was then laid horizontally back into the
soil, measured to fit the area, and cut to the desired length with a utility
knife. He then compacted the backfill solid to 95% standard Proctor after each
course as he completed vertical construction of the 6-foot retaining
wall.
 |
Photo: Stone Strong Systems |
| Walls at Baltimore's Loyola College allowed expansion of playing fields. |
The
geogrids are composed of high-molecular-weight polyester yarns protected by a
PVC coating. These yarns are woven into a stable interlocking grid that is
resistant to biological degradation and natural alkalis and acids found in soil.
“The product works by allowing interaction between the soil above and below the
geogrid,” SRW engineer Mike Orton explains. “[In retaining wall stabilization],
geogrid is superior to fabric products because the geogrid won’t plug up with
fines and create a layer where water can collect.”
Wolf
concurs. “We almost always use geogrid, even on our 4-foot-high retaining walls.
We don’t want to ever have to come back to replace anything we do, and the
geogrid is our extra insurance that the wall will hold. We haven’t had any of
our walls fail, and we’ve been using SRW geogrid for about four
years.”
No
Expense Spared to Give Upscale Resort Access to Lake
Moises
Hernandez, president of Classic Tejas Construction Inc. near Fort Worth, TX, was
involved in a project to create artificial canals at The Resort on Eagle
Mountain Lake, a 540-acre master-planned, gated luxury residential community on
the shores of Eagle Mountain Lake in Fort Worth.
The
community’s elevation drops more than 100 feet from the entrance of the resort
to the lakeshore, creating expansive views of Eagle Mountain
Lake.
 |
Photo: Stone Strong Systems |
| Construction at Loyola College solved drainage problems as well as expanding intramural sports fields. |
The
entire project is ongoing, according to Hernandez, with phase one being
completed in 18 months from September 2006 to March 2008. “We still have phases
two, three, and four left to do. Phase one should have taken six months less
time, but extremely atypical rain patterns here in the Dallas-Fort Worth area in
2007 caused delays in production, with July 2007 being particularly wet. July is
normally a very dry and hot month, but we couldn’t even
work.”
For
the retaining wall, Hernandez used Keystone 133Elite modular retaining wall
blocks, manufactured by Jewell Concrete Products.
The
wall was used to create artificial canals in the upscale subdivision to allow
residents access to the lake, which in the future will have floating boat docks.
“The canals have been connected with the lake, so residents have access via
their backyards to the lake, when previously the only thing there was dirt,”
Hernandez says.
The
canals are 148 inches tall and run a currently installed length of 5,200 feet,
with more wall installed near the bridge abutment area. The canals were designed
by Half Engineering, with the wall engineered by Richard Jenkins of Ettamar
Engineering in Round Rock, TX.
“The
modular design of this project is a really beneficial part in that it allows the
water to permeate the block, so that when the lake rises or falls the water is
not being held back,” Hernandez says. “The modular block was a major cost
savings over a cast-in-place wall or other similar types of walls, such as
mortared stone walls, which would not work because of the water. John Owens,
project supervisor with Centurion American [a land developer], was a vital
person on this project, as his 30-plus years in bridge and excavation experience
were invaluable to our excavation process in getting proper slopes and proper
soils mixed for our application needs.”
 |
Photo: MSE Site Solutions |
| This wall created additional parking for Lowe's store in Atlanta. |
Hernandez
says that the Keystone blocks are perfectly suited for this application. “The
design of the block allowed us to get more production, as each Elite block
covers 1.33 square feet; and with it being an open block, we are able to fill in
the back of the block and a foot of gravel in 3-foot increments, thereby
allowing us to get even better production by not having to backfill every
course. And the color of the block works very well in that it blends in with the
environment. The blocks vary in color, so we do not have a product color
variation due to the manufacture of the block at different
times.”
The
challenge in this project was dealing with water levels, according to Hernandez,
who says that crews were constantly pumping water out of the work area, into the
lake, and blending existing onsite sandy and clay soils to achieve a good
combination—not to mention doing all of this without having a negative impact on
the homeowners.
The
backfill for the project was taken from
onsite, and blended onsite as well, mixing clay soils with sandy clays. “This
site used to be a sand pit, so we achieved a low PI [plasticity index] without
having to resort to importing large amounts of fill,” Hernandez
says.
 |
Photo: Lock + Load |
| Riverside Station in Virginia overlooks the Potomac River. |
Because
this was a modular retaining wall, a gravel backfill with drainpipe served as
drainage.
Access
was somewhat of a problem, as crews had to create ramps to access the work area
every 300 feet and work around natural springs because the project was at water
level.
Wall
Keeps Pedestrians Safe in Tacoma
A
very different project in the city of Tacoma used WestBlock’s GravityStone
Hybrid System, which combines the Modular and MSE structural systems within a
single design.
“This
was a taller wall, with the highest point at 10 feet,” Saathoff says. “We had
access only to the front of the wall because there was a private property
behind. It was a narrow residential city road, so we had to block it off
occasionally to get equipment through.”
Gary
Jones, president of S&W Utility Contractors Inc. in Lakewood, WA, was also
involved in the project. He explains that the city needed to elevate a curve in
the road to provide a safer walkway along Slayden Road up to Brown’s Point
Elementary School. “It was a narrow road with limited sight distance,” Jones
says. “It had a steep incline with an elevation rise on one side of the roadway
and a drop on the other, a little like a mountain road.”
The
road’s popularity as a shortcut both to the school and to the Brown’s Point
community made safety a priority, but another concern involved stormwater in the
area. “The existing drainage was a V-ditch with culverts at the driveway
points,” Jones says. “A significant rain created a volume of water that scoured
a ditch on its way downhill. This road is half a mile from Puget Sound, so water
quality was also an issue.”
The
first step was to install piping, catch basins, and other flow control measures.
“During the project, there were engineering issues, and the project was
redesigned to improve sight distance because of the curve in the roadway,” he
says.
Because
of a private residence abutting the property, widening and straightening the
road involved restrictions. “There was finite width,” Jones says. “The original
plan was to install large concrete blocks. Each one is 5 feet tall, 2.5 feet
wide and 2.5 feet deep. They work if a wall is no taller than 7.5 feet. But this
wall had to be 10 to 12 feet high, so the blocks would have had to be turned
perpendicular into the bank, which would make them 5 feet wide. As stacked, you
would need a one-to-six batter as you moved back. The wall would encroach onto
the nearby property.”
Using
WestBlock’s GravityStone Modular system, combined with MSE at the top of the
wall, crews were able to stack the components vertically and stay within the
easements. “I go 30 years back to when we used rock walls,” Jones says, “and to
retain this section of berm, WestBlock’s system was the cat’s
pajamas.”
 |
Photo: Stone Strong Systems |
| Wall construction required closing nearby roads only briefly. |
In
addition to straightening the roadway and providing increased visibility for
motorists, the city provided an elevated sidewalk 3 feet above traffic. To hold
the walk, a shorter 3-foot wall was built next to the curb, and a 5-foot
horizontal walkway was created between that wall and the 10-foot wall beside it.
A 4-foot chain-link fence was installed along the dropoff for additional
safety.
Load-Bearing
Walls Can Take a Beating
Don
Schlusemeyer of Clark Builders Group Inc.
in Ashburn, VA, was the senior project executive on the Riverside Station
project located on Rippon Landing Drive in Woodbridge, VA.
With
11 acres atop a bluff overlooking the Potomac River and a short walk from the
adjacent Rippon Virginia Railway Express Station, the Riverside Station
Condominiums, with 304 apartments, provide easy access to Washington, DC, 20
miles away.
The
challenge in this project, completed in 2005, was the existence of a fire road
running behind the three buildings, which are surrounded by a 20- to 30-foot
wall falling back and winding around the structure. “The original wall was
susceptible to line loads,” Schlusemeyer says.
Using
Lock+Load Retaining Wall Systems, a new wall was constructed, requiring geogrid
and structural fill. Despite the size of the installation, it was relatively
simple, according to Schlusemeyer. “Lock+Load resolved the support
issues.”
Without
a Wall, Homeowners Can’t Go Home Again
Garrett
Meinke of Chateaux Construction Company Inc. was the general contractor for a
residential project at Altdorf Terrace in Incline Village, NV. True to its name,
the site was a steep mountain lot that required a retaining wall to create a
driveway in an area where access was extremely difficult and where large amounts
of snow fall during the winter months.
 |
Photo: Stone Strong Systems |
| Both imported aggregate and onsite fill were used behind the wall. |
“It
required quite an excavation to create the driveway,” Meinke says. “The site
work was a major part of the project. We had to excavate a 19-foot vertical cut
in order to accommodate the driveway.”
The
reinforced retaining wall was created by stacking 16- by 32-inch stones that
anchored into the soil. The stones were laid horizontally a course at a time in
front of the vertical bank that needed to be retained. The space (which varied
up to 10 feet) between the vertical bank and the blocks was backfilled with
engineered soil and then compacted.
A
reinforced plastic geogrid mat was placed horizontally in the soil at every
other course to stabilize the soil and the wall. For drainage, 0.75-inch gravel
was placed against the vertical bank and brought up with each course to
intercept the majority of the groundwater and keep it away from the compacted
soil behind the wall. A 4-inch perforated drainpipe was installed at the bottom
of the gravel to collect the water and carry it away from the backfill and the
wall.
When
the wall was built to its completed height, the engineered soils were graded
from the back of the wall at a 1:1 slope to meet the existing grades. The
exposed slope was then covered with 6 to 8 inches of rock cobbles to stabilize
the soil and prevent erosion. “We had a very heavy snow pack this past year and
have experienced no erosion of the soils or wall, and the groundwater from the
subdrainage has been very minimal,” Meinke says.
The
homeowner, a builder and developer who is using the property as his vacation
home, researched and chose Lock+Load Retaining Walls Systems. “He felt it had a
competitive price and that the larger dimension of the diameter blocks looked
better on a tall wall, since they are beefier and not as busy as smaller blocks.
The installation proved to be relatively easy, and the adjacent property owners
have given us many compliments since it has been completed,” Meinke
says.
Retaining
Wall Helps Students at Loyola Become Better Sports
Athletics
are often the lifeblood of a university, and while the major programs receive
constant attention and funding, recreational and intramural activities are apt
to get second billing. Not so at Loyola College in Baltimore, MD, where
administration officials recognized the need to improve the playing site for
these sports venues.
Landscape
architect Brian Stephenson, principal of Brian Stephenson and Co. in Washington,
DC, has become a new fan of Stone Strong Systems for building retaining walls.
Loyola’s field for recreational and intramural sports activities was in bad
shape, according to Stephenson. “Water just sat on it. There was no grade, and
offsite water from the hillside above it was making the field unsafe for play.
In addition, it wasn’t big enough for regulation sports; it didn’t meet the
minimum size for sports like soccer and lacrosse.”
In
reconstructing the field and eliminating the water issues, administration
officials decided to lengthen and widen the field to allow adequate space for
regulation field sports as well as two small-sided games (for instance, two
five-on-five games instead of one 11-on-11 game) to be played in tandem across
the width of the field. “This allows for more flexible use, especially at an
urban school where space is at a premium,” Stephenson
says.
Expanding
the field involved construction of two walls; a 15-foot maximum cut wall on one
side and a fill wall of the same size on the other side. “Using the Stone Strong
product allowed us the length and width to expand the field and fit on campus,”
Stephenson says. “The cut-slope wall was within 25 feet of an existing access
road which we closed during construction for safety. It only took about a week;
if we had used a traditional poured-in-place concrete wall, the road would have
been closed much longer.”
A
manufactured standard drainage system corrected the wetness problem, especially
in one corner, where the part of the original field had collapsed, Stephenson
says.
The
larger block size offered by Stone Strong Systems was particularly appealing,
according to Stephenson, who says these blocks are 4 feet wide, 2 feet tall, and
4 feet deep. “It looks good, because the unit is in proportion to the wall size.
It looks very stone-like and rustic.”
Imported
drainage aggregate was used behind the wall with the rest of the fill salvaged
from the site.
Wall
Goes Up Fast, Adding Needed Space to Property
Al
Paul is the owner of William’s Environmental Services and Technologies (WESTECH)
in Courtenay, BC. His company is the distributor for Lock+Load on Vancouver
Island.
In
March 2008, WESTECH installed an approximately 7,000-square-foot wall in
Victoria on Vancouver Island, where the owner of a commercial site wanted to
maximize the property and get parking and storage on land that sloped down to
the road below.
Paul
says that the retaining wall was constructed to retain the soil at the building,
which was itself constructed approximately 12 feet above the grade of the road
below. “The base of the Lock+Load wall starts at 2 meters below grade. This was
necessary, as public works required future access to underground utilities
without undermining the wall. The fence above the wall is a heavy steel
structure with posts that were installed directly behind the counterforts, or
tiebacks.”
For
this project, all the fill material was imported, including pit-run gravel and
road base for backfill, Paul says. Perforated drainpipe with filter cloth was
installed behind the counterforts and bedded in drain rock. This was then tied
into the perimeter storm drains.
The
advantage of this type of wall for this application was its ease of
installation, according to Paul. “The general contractor was on a tight schedule
and required a product that could be installed quickly. Lock+Load worked very
well in this application, as one panel covers 3.5 square feet and is very light
for its size—they are approximately 125 pounds each. They are flat panels, so we
were able to stockpile large quantities without taking up too much of the site;
one B-train load holds approximately 2,300 square feet. We needed minimal
crew—two to three installers, a Bobcat, a mini-excavator, and a large compactor.
The wall was built in close proximity to other crews onsite without interfering
with their work.”
Let
the Competition Begin
Karl
von Terzaghi (1883–1963) was an Austrian civil engineer and geologist. Called
the father of soil mechanics, he once gave his students at Harvard this bit of
advice: “Engineering is a noble art which calls for good sportsmanship.
Occasional blundering is part of the game. Let it be your ambition to be the
first one to discover and announce your blunders. If somebody else gets ahead of
you, take it with a smile and thank him for his interest. Once you begin to feel
tempted to deny your blunders in the face of reasonable evidence, you have
ceased to be a good sport. You are already a crank or a
grouch.”
As
companies vie with one another to find the perfect retaining wall, they would be
wise to consider what can be learned from the other guy.